page 2

The carrier sheet is not coming away after being pressed?

Take the garment off the press, leave to cool for about 10 seconds and try peeling the carrier sheet off again. Also make sure adequate pressure is applied when pressing.

The film is not adhering very well to garment?

Refer to pressing instructions, which you will find on the Victory website. Click on garment films in the navigation bar (left), then select which EasiMARK garment film you need a specification for and it will show on the page the option to download pressing instructions.

There seems to be visible pin pricks appearing in the film on the garment?

This has probably been ironed over. We advise that you turn the garment inside before ironing. Do not use a steam iron.

The film seems to be cracking on the garment?

It has either been washed at a high temperature, tumble dried too often or left to dry on a radiator than the specification advises.

Is EasiMARK Nylon suitable for all Nylon applications?

Due to various P U coatings used on EasiMARK Nylon for waterproofing, we always recommend a pre-test. Once applied run under warm water then try and pick it off.

I have purchased application tape and it isn’t lifting the graphic up, what should I do?

It’s very likely you have chosen the wrong application tape. Ask for advice on which one would be suitable for you to use email: sales@victorydesign.co.uk