Signmaking supplies, digital printing and garment marking products - Victory Design Ltd

At Victory Design we pride ourselves on working with the leading manufacturers in the industry and our reflective range is no different. We believe we are working with the 2 leading manufacturers in the market place today for reflective films being 3M & Nikkalite.  This seems to be proved with there consistent quality and vast ranges of reflective films ranging from promotional products right through to microprismatics for Vehicle Conspicuity, Permanent Traffic Signage & Temporary Signage often exceeding the British Standard regulations in all areas required for reflective markings. We supply in our pre cut kits two versions of reflective films from each manufacturer to meet current recommendations these are both supplied with the relevant Fluorescent yellow films. This is done to maximise night time visibility with the reflective film whilst the fluorescent yellow giving the optimum daytime visibility. For vehicles travelling and stopping on roads less than 40mph you may use an engineering grade reflective although we recommend to always use a microprismatic reflective to give the ultimate visual appearance from all viewing angles. For vehicles travelling and stopping on roads over 40 mph it is recommended that a microprismatic is always used.

Engineering Grade Reflective Diamond Grade DG3 Microprismatic Reflective 3485 Saturn Fluorescent Yellow FEG Flexible Engineering Grade CVF Crystal Grade HI-SCAL Fluorescent Yellow

680 Diamond Grade DG3 Microprismatic Reflective 3485 Saturn Fluorescent Yellow CVF Crystal Grade HI-SCAL Fluorescent Yellow

At Victory Design we are proud of our relationships with both our manufacturers. Please see a list of benefits below for both 3M & Nikkalite materials.

12 Year warranty on DG3 with a minimum 7 year durability peformance on standard colours. Optimum reflectivity at every viewing distance. Permanent adhesion to all painted vehicle bodywork. Edge Sealed barrier against moisture & dirt. Fully approved for use on all vehicle types 3 year warranty on 3485 Fluorescent yellow which is 1 year longer than its competitiors. Optimum protection for companies and public. Optimum performance in daylight and darkness. The warranted peformance life of DG3 minimises replacement and disposal costs benefiting environment.


Standard colours expected to have a useful working life of a minimum of 7 years on Crystal Grade. High contrast at all times in all conditions. Comes with advantedge sealing technology keeping everything out. Flexible to handle making for quicker fitting times. Visability you can count on during day and night. Hi-Scal Fluorescent comes with a 2 year warranty. Competitive against other brands in market place. Meets all legislation for DFT for chapter 8 requirements.

All our kits come as pre cut individual panels with all our microprismatic films edge sealed within our cutting process to stop any penetration of water and dirt within the reflective cells. The panels are then hinged together with masking tape to aid in the fitting process. The kit is then folded and wrapped and then placed in between 2 sheets of foam board for protection ready for shipment. All our kits are supplied with the relevant drawing proof for the vehicle ordered to aid in the fitting process and to ensure the material within the kit matches to the proof before you begin fitting.

We aim to keep the delivery time for all of our kits to a minimum and currently work on a 3-5 day lead time from day of proof being signed off. However if you have a special requirement for a quicker delivery time then don’t hesitate to ask or fill in the online order enquiry form as part of the order stating delivery time required and we will do our upmost to meet your needs. Once the kit is produced it will be sent by our courier service on a 24 hour delivery service. We also offer a timed delivery service to UK mainland of Pre 9.00am, Pre 10.30am and Pre Noon for a small additional cost.  

The answer in short is yes. Whatever vehicle even if it is listed or not, whatever special requirement you have for your vehicles we can meet your requirements so please ask or alternatively fill in our online enquiry form. For more obscure vehicles there may be an additional template charge involved which we would let you know before placing the order what this would be this will give you the added peace of mind that you are getting exactly what you require. In addition we can offer side panels for your vehicles or if you have a specific requirement on material or a certain way you wish the material to be supplied we have this option available. In addition we supply separately Highway Maintenance Legends that can be purchased through the ancillary section on our chapter 8 section of the Victory Design website.

Whatever the size of the fleet you have to put chapter 8 markings on we aim to provide the best possible prices for the best products in the market place. We can offer discount structures on larger numbers of vehicles so please don’t hesitate to ask either by calling one of our dedicated sales team on 01246 570570 or by filling in our online chapter 8 enquiry form. If you also find yourselves competing or tendering for projects please also contact us were we will strive to ensure you get the best prices available to help you and your business win the contract.  

The reason for edge sealing is to close off any open cells ensuring that any dirt, water or other foreign bodies does not enter and affect the reflectivity of the material. By edge sealing you are also ensuring that the manufacturer will offer a guarantee on the product, this also avoids any failings in turn making sure you get a clean looking, well performing product.

The kit will be supplied to you with all individual panels taped together; the easiest way is to start by taping the top of the kit to the vehicle so you can check that everything is in order by matching what you see to the diagram provided. Please see Application guide for full details.  

The Department For Transport (DFT) code of practice for safety at street works and road works require rear conspicuity markings on all works vehicles whether new or not. However, vehicle operators are strongly advised to adopt compliant marking for vehicles now as Highways Agency contracts already require it. DFT guidance on marking is published in Chapter 8 of the traffic signs manual and failure to follow safety guidelines and best practice carries the risk of substantial liability or even criminal charges should this result in a serious accident. Reduce accidents and save lives Improve safety and increase visibility of vehicles Reduced accidents means less downtime and decreased repair costs Improve corporate image through being more proactive about safety Protect your company against potential legal action related to third party safety All our livery kits meet or exceed guidelines set out by REMA (Retroreflective Equipment Manufacturers Association) Please click on the links below to see the full recommendations and regulations for chapter 8 vehicle markings.

Each of our kits as a unique number - Quote this when requesting a replacement panel which will then allow us to establish which panels you require for your vehicle. We offer a 72 hour delivery time for all replacement panels meaning your vehicle will be of the road for a short period of time ensuring the cost to your business is kept to a minimum.

For more obscure vehicles we have the ability to template any vehicle. However there may be an additional charge for this process based on where we can locate a vehicle to carry out this process. From this we can then take the template and upload this to our substantial library of vehicles ready for cutting your required chapter 8 kit. There would be an additional lead time when a template is required which we aim to carry out and deliver to you within 10 days from the point of ordering.