3M Fluorescent Vinyl
3M™ Scotchal™ Fluorescent Film Series 3480 are designed to be highly conspicuous under all daylight conditions and to provide the high attention value desired under conditions of poor visibility, particularly at dawn or dusk.
3484 is a glossy cast vinyl with a solvent based, pressure sensitive, removable adhesive. It is 170 microns thick and can be both wet and dry applied.
45.7 metres on a roll.
Central UK Location
Daily deliveries throughout
the UK and Europe
Description
3M™ Scotchal™ Fluorescent Film Series 3480 are designed to be highly conspicuous under all daylight conditions and to provide the high attention value desired under conditions of poor visibility, particularly at dawn or dusk.
3M Fluorescent Film Series 3484 is a glossy cast vinyl with a solvent based, pressure sensitive, removable adhesive. It is 170 microns thick and can be both wet and dry applied.
FAQ
3M Saturn Fluorescent yellow is best stored at a temperature within the range of +4°C to +40°C, and out of direct sunlight. It is advised to keep the vinyl in its original packaging, in a clean and dry area.
It is recommended by the manufacturer that 3M Saturn Fluorescent Yellow is used within 2 years from the date of manufacture listed on the original sealed box. The product should be used within 1 year after opening the box.
3M Saturn Fluorescent Yellow’s face film is 170 µm (0.170 mm) thick, excluding the siliconized adhesive backing.
3M Saturn Fluorescent Yellow is rated for a 3 year service life with vertical outdoors exposure.
3M Saturn Fluorescent Yellow can be removed by applying heat to the surface and carefully peeling away. A soft plastic card can be used to help with removal. An adhesive remover may be required as adhesive residue could remain after the vinyl is peeled off.
Product Information
Product Specification
Download a full product specification here
