ORALITE 5200 Economy Grade
ORALITE® 5200 Economy Grade was especially developed for the manufacture of information signs as well as for reflective advertising art, which are intended for a short-term outdoor use and which require just a minimum of retro-reflection. The smooth surface shows a high scratch resistance and impact strength, and a very good printability. The ORALITE® 5200 Economy Grade has an adhesive with an excellent adhesion on metallic surfaces as aluminium and zinc coated steel plate.
ORALITE® 5200 can be screen printed with ORALITE® 5018 Screen Printing Ink or inkjet printed with most solvent based inks, UV- or Latex inks. Please refer to the chosen ink manufacturer’s instructions to determine if an application laminate is required. If required, it is recommended that the material is laminated with ORAGUARD® 290F or ORAGUARD® 293F in order to provide increased UV protection. When using non-ORAFOL inks or printers, the application must be tested and approved by the customer.
When using the ORALITE® 5200 Economy Grade the particular national specifications have to be complied with.
|Thickness* (without protective paper and adhesive)||120 micron|
|Temperature resistance**||Adhered to aluminium, -50°C to +82°C|
|Adhesive power* (FINAT TM1 after 24h, stainless steel)||15 N/25mm (film tear)|
|Shelf life**||2 years|
|Application temperature||> +10°C|
|Service life by specialist application*** under vertical outdoor exposure||3 years|
*average **in original packaging, at 20°C and 50% relative humidity ***standard Central European climate