Avery MPI 2004 HOP Easy Apply Digital Gloss White 50m roll
Central UK Location
Daily deliveries throughout
the UK and Europe
Avery Dennison MPI 2004 HOP EA comes with a white highly opaque face film and a clear adhesive, allowing to cover a full range of flat and slightly curved medium term regular and over posting applications and significantly reducing customer stock inventory (without the need to hold both clear and grey adhesive stock).
They are suitable for use on a variety of super wide format inkjet printers using solvent, eco/mild solvent, UV-curing, and latex inks.
50 metres on a full roll.
The embossed backing is providing enhanced ease-of-use during application. Entrapped air can easily be rubbed out without the need to punch the vinyl film.
Avery Dennison MPI 2004 HOP EA is a multi-purpose vinyls, developed for use on various wide format printer platforms using solvent-, eco/mild solvent-, UV curable and latex inks. To enhance colour and protect images against UV radiation and abrasion, Avery Dennison MPI 2004 HOP EA are recommended to be overlaminated with Avery Dennison DOL 2400 series.
Do NOT use wet application methods for Avery Dennison Easy Apply products.
Recommendations:
- Large fleet graphics on flat or slightly ≫ curved surfaces
- Architectural interior & exterior signs
- Over posting applications on flat and slightly curved substrates
- Temporary promotional and point of sales advertising where superior hiding power is needed
- Window decoration (excluding block out applications)
Features
- Excellent price/performance ratio for outdoor promotional graphics
- Excellent printability and handling on a wide range of printer platforms
- High Opacity film allowing to achieve outstanding full colour graphics
- High Opacity film properties for superior hiding power and over posting applications
- Clear adhesive enables reducing customer stock inventory covering both standard and over posting
applications.
Avery MPI 2000/2800 Polymeric Films
More information about Avery MPI 2000/2800 Polymeric Films
Avery MPI 2004 HOP Easy Apply
Specification sheet for Avery MPI 2004 HOP Easy Apply
Avery Dennison Digital Media printing guidelines emphasise proper media handling, printing setup, and finishing processes to ensure optimal print quality and performance. These guidelines cover aspects like media profiles, drying times, application techniques, and troubleshooting.
1. Print Preparation
Media Profiles
Ensure the correct media profile is installed and selected in your print server. This profile contains information about the printer, RIP, ink, and the specific Avery Dennison media being used.
Drying
For solvent printing, films need to be fully dried before applying overlaminates. A 24-hour drying time is generally sufficient for full solvent inks, while 48 hours is recommended for eco-/mild solvent inks. Allow for longer drying if a lot of ink is deposited.
Winding
When drying, avoid tightly winding the material on a core, as this can hinder solvent evaporation. Loosely wound or stacked sheets are preferred.
2. Printing
Resolution
For sharp, clear images, a resolution of 300 DPI is recommended.
Colour Matching
Digital printing may have limitations in achieving precise Pantone or specific colour shades.
3. Finishing
Overlaminates
If applying overlaminates, ensure the printed material is thoroughly dry to prevent potential issues.
Cutting
For cutting, ensure the blade is clean and sharp.
Stabilisation
After curing, allow 4-8 hours for the ink and substrate to stabilize before die-cutting, pre-masking, or chemical resistance testing.
4. Application
Surface Preparation
Clean the substrate thoroughly before applying the media.
Application Tools
Use a squeegee with overlapping strokes, applying moderate pressure.
Temperature
Avoid applying films in extreme temperatures. If necessary, use a heat gun to gently warm the material during application.
Troubleshooting
If bubbles or wrinkles occur, try using a heat gun or repositioning the film with the Avery Dennison Easy Apply™ or RS technology.
5. Cleaning and Maintenance
Cleaning
Use a gentle cleaning solution (water with a small amount of soap) and a soft cloth. Avoid using harsh chemicals or abrasive materials.
Pressure Washing
Use pressure washing with caution, keeping pressure below 1200 psi and water temperature below 120° F.
6. Additional Tips
Testing
Thoroughly test all performance characteristics, including print quality, durability, and chemical resistance, before each production run.
