Avery Surface Cleaner 1 litre CA3750001
- Buy 3 for £18.00 £15.00 each and save 3%
- Buy 6 for £16.44 £13.70 each and save 11%
- Buy 12 for £15.98 £13.32 each and save 14%
- Buy 24 for £15.18 £12.65 each and save 18%
Central UK Location
Daily deliveries throughout
the UK and Europe
Avery Surface Cleaner is a high performance cleaner that enables you to remove all kinds of residue in one single action including dirt, wax, tectyl, light silicone, cock-pit sprays and more.
A highly user-friendly cleaner, it can also be used for removing small amounts of adhesive residues from surfaces.
Please note: this product cannot be exported but you are welcome to arrange your own collection.
Avery Surface Cleaner is a high performance cleaner that enables you to remove all kinds of residue in one single action including dirt, wax, tectyl, light silicone, cock-pit sprays and more.
A highly user-friendly cleaner, it can also be used for removing small amounts of adhesive residues from surfaces.
FAQ
Each bottle of Avery surface cleaner is 1L.
Each box comes with 6 bottles of Avery surface cleaner.
There are price breaks for quantities of 3,6,12 and 24 bottles of Avery surface cleaner.
Avery recommends covering up to 1m diameter circle with each spray of surface cleaner for ideal cleaning.
When using Avery Surface Cleaner, you should spray in a 1m diameter circle after giving the bottle a good shake, then leave for 30 seconds before gently wiping the surface. Repeat as many times as necessary.
Avery surface cleaner can remove residue, dirt and impurities such as dirt, wax, light silicone, cock-pit sprays and more.
Avery surface cleaner is a low hazard and low risk product. Avoid inhalation and ingestion, wash off if it comes into contact with skin.
Avery recommends storing the surface cleaner in a cool dry place, out of direct sunlight, and below 350C.
Avery Dennison Film Application: Surface Preparation Guide
Achieving optimal adhesion with Avery Dennison films requires a clean, dry, smooth, and non-porous surface, free from all contaminants. Always assume your surface needs thorough cleaning and follow these guidelines for surface preparation:
Recommended Cleaning Process:
- Initial Wash: Clean with a mild detergent solution, then rinse and dry completely with a lint-free cloth.
- Final Clean & Degrease: Once dry, use Avery Dennison Surface Cleaner and a lint-free cloth. Repeat as needed for optimal preparation.
Key Factors for Specific Surfaces:
- Bare Metals: Prepare using the two-step cleaning process above.
- Wax/Polish: Remove all car wax and polish residues.
- Paint:
- Ensure paint is fully cured and dry (baked paints: apply after cooling; air-dried/repair paints: allow 1-2 weeks to dry).
- Prevent solvent retention, which can cause poor adhesion, shrinkage, or blistering.
- Follow paint manufacturer's instructions. Incompatible paint layers may lift when film is removed.
- Weathered Surfaces: Lightly abrade to remove loose particles.
- Irregular Surfaces: Use a heat gun to dry any liquid trapped in features like rivets or corrugations after cleaning.
- Damaged Surfaces: Repairing damage before application is recommended to ensure consistent adhesion.
