easiMARK Colourprint Premier Blockout

Heat seal transfer film for use with solvent and eco solvent printers such as the Roland Versacamm. For application onto 100% sublimated polyester (e.g. sportswear).

  • Prevents ink migration on sublimated polyester
  • Durable prints
  • Supplied by the metre at 500mm and 750mm wide
  • Print & cut
In stock
SKU
easiMARK Colourprint Premier Blockout
As low as £8.68

How to press easiMARK Colourprint Premier Blockout T-Shirt Transfer Film


How to use:

  1. Print and cut the material, weeding away the excess garment film. Blade: new at 45 degrees, pressure: 80gf, speed: 20 cm/sec.
  2. Remove the print from the polyester backing using an application tape (we recommend EMATAPEC).
  3. Heat apply sealable side down at 130 degrees C for 15 seconds, medium pressure.
  4. Remove application tape hot (should you use other application tapes, always follow the manufacturer's instructions).

Care instructions:

  • Wash up to 40 degrees C
  • Do not dry clean
  • Do not tumble dry
  • Iron on reverse

Please wait 24 hours after pressing before washing and do not use bleach or other agressive chemical agents.

Product Download Icon

Product Specification

Download a full product specification here