easiMARK Mirror Metallic T-Shirt Vinyl
In stock
SKU
easiMARK Mirror Metallic
As low as £10.07 £8.39


Central UK Location
Daily deliveries throughout
the UK and Europe
This heat sealable garment film has a high shine, mirrored metallic surface for CadCut applications. It's a great choice for creating eye-catching t-shirt transfers.
- Easy cutting and weeding properties
- Adhesive polyester backing
- Wait just 3-5 seconds and remove polyester backing
- Supplied by the metre at 500mm wide
easiMARK mirror metallic is super shiny - Check out this video!
easiMARK mirror metallic is super shiny - Check out this video!
How to use:
- Cut in mirror image and weed away the excess garment film. Blade: new at 60 degrees, pressure: 130gf, speed: 15 cm/sec.
- Heat apply sealable side down at 160 degrees C for 15 seconds, medium pressure.
- Remove backing film when warm or cold.
Care instructions:
- Hand wash inside out
- Do not dry clean
- Do not tumble dry
- Iron on reverse
Please wait 24 hours after pressing before washing and do not use bleach or other aggressive chemical agents.
General Weeding Tips:
- Lighting and Workspace: Ensure a well-lit area and a clean surface to prevent losing small design pieces.
- Proper Weeding Tool: Use a tool with a pointed tip (e.g. easipick, tweezers, or a hook-ended tool) to remove excess material.
- Weed From the Left: For reverse-cut designs (design on carrier film), start weeding from the left and move to the right.
- Remove Inner Parts First: For letters with inner spaces (like "O" or "B"), remove the inner pieces before weeding the outer edges.
- Add a Cut/Weed Box Around the Design: When working with multiple designs, adding a cut box around each decal can aid in cutting and weeding.
Recommended Weeding Tools:
- easiPick: This handy tool has a sharp curved hook for greater precision when weeding sign vinyl and garment film, helping to ensure that your designs are not ruined during the weeding process.
- Pointed Tip Tweezers: For precise picking and removal of small vinyl pieces.
- Curved Fine-Tip Tweezers: Good for reaching into tight corners and spaces.
- Flat-Nosed Tweezers: Helpful for holding vinyl without tearing it.
- Weeding Hooks: For picking up and removing excess material with a hook-like tip.
Specific Tips for Different Situations:
- Small Details: Use fine-tipped tweezers or a hook-ended tool for precise removal.
- Large Designs: Consider using application tape or a transfer mask to facilitate weeding.
- Iron-on Vinyl: Ensure your cutting machine's pressure and force settings are not too high to avoid cutting too deep
Write Your Own Review