Avery MPI 7201 Window Vision Bundle Inc Avery Dol 4000 Ultra Clear Laminate 1370mm x 50m
Central UK Location
Daily deliveries throughout
the UK and Europe
This digital media bundle contains a roll each of Avery MPI™ 7201 PWF Gloss Removable Window Vision and Avery DOL 4000 Ultra Clear Laminate at 1370mm x 50m.
Get ultimate peace of mind with this digital bundle. By using a matched system, you’ll achieve fantastic print results, enhanced application and amazing durability.
Avery MPI 7201 PWF Gloss Removable Window Vision
Avery Dennison MPI 7000 Perforated Window Film series consist of perforated, calendered films with a black backside for use on transparent substrates (i.e. glass).
Avery MPI 7201 PWF Gloss Removable consists of 160 micron gloss white vinyl, with 1.5 mm perforation and 40% of open area.
After printing this film allows the full graphic to be seen on one side but still allows viewing through the window from the other side.
Avery DOL 4000 Ultraclear Gloss Perm Film inc Liner Lamination Film
Avery Dennison DOL 4000 Ultra Clear Cast is a premium quality, flexible cast vinyl film designed for use as a protective overlaminating film for digitally printed images, especially for Perforated Window Films.
Protective overlaminating film for digital printed images on flat or curved substrates. For indoor and outdoor use.
Each of these products can also be purchased separately.
For Avery MPI 7201 PWF Gloss Removable Window Vision please click here.
For Avery DOL 4000 Ultraclear Gloss Perm Film please click here.
This digital media bundle contains a roll each of Avery MPI™ 7201 PWF Gloss Removable Window Vision and Avery DOL 4000 Ultra Clear Laminate at 1370mm x 50m.
Get ultimate peace of mind with this digital bundle. By using a matched system, you’ll achieve fantastic print results, enhanced application and amazing durability.
Avery MPI 7201 PWF Gloss Removable Window Vision
Avery Dennison MPI 7000 Perforated Window Film series consist of perforated, calendered films with a black backside for use on transparent substrates (i.e. glass).
Avery MPI 7201 PWF Gloss Removable consists of 160 micron gloss white vinyl, with 1.5 mm perforation and 40% of open area.
After printing this film allows the full graphic to be seen on one side but still allows viewing through the window from the other side.
Avery DOL 4000 Ultraclear Gloss Perm Film inc Liner Lamination Film
Avery Dennison DOL 4000 Ultra Clear Cast is a premium quality, flexible cast vinyl film designed for use as a protective overlaminating film for digitally printed images, especially for Perforated Window Films.
Protective overlaminating film for digital printed images on flat or curved substrates. For indoor and outdoor use.
Recommendations:
- All types of one way vision graphics on buildings, glass panels and glass doors
- Continuous, uninterrupted vehicle graphics covering painted and window area
- Colorful graphics on windows that still provide sufficient interior daylight
Features:
- High-impact promotions for passers-by
- Good privacy inside, with a clear view of the outside
- Fire certification available
- Long-term durability with ICS performance guarantee
- Controls glare, UV and solar heat
Avery MPI 7000 Perforated Window Films
Download the specification sheet for Avery MPI 7000 Perforated Window Films
Avery Dennison DOL 4000 Ultra Clear Data Sheet
Download the Avery Dennison DOL 4000 Ultra Clear data sheet here.
Avery Dennison® MPI™ 7000 series - Perforated Window Films
Find out more about Avery Dennison® MPI™ 7000 series - Perforated Window Films
Avery Dennison Digital Media printing guidelines emphasise proper media handling, printing setup, and finishing processes to ensure optimal print quality and performance. These guidelines cover aspects like media profiles, drying times, application techniques, and troubleshooting.
1. Print Preparation
Media Profiles
Ensure the correct media profile is installed and selected in your print server. This profile contains information about the printer, RIP, ink, and the specific Avery Dennison media being used.
Drying
For solvent printing, films need to be fully dried before applying overlaminates. A 24-hour drying time is generally sufficient for full solvent inks, while 48 hours is recommended for eco-/mild solvent inks. Allow for longer drying if a lot of ink is deposited.
Winding
When drying, avoid tightly winding the material on a core, as this can hinder solvent evaporation. Loosely wound or stacked sheets are preferred.
2. Printing
Resolution
For sharp, clear images, a resolution of 300 DPI is recommended.
Colour Matching
Digital printing may have limitations in achieving precise Pantone or specific colour shades.
3. Finishing
Overlaminates
If applying overlaminates, ensure the printed material is thoroughly dry to prevent potential issues.
Cutting
For cutting, ensure the blade is clean and sharp.
Stabilisation
After curing, allow 4-8 hours for the ink and substrate to stabilize before die-cutting, pre-masking, or chemical resistance testing.
4. Application
Surface Preparation
Clean the substrate thoroughly before applying the media.
Application Tools
Use a squeegee with overlapping strokes, applying moderate pressure.
Temperature
Avoid applying films in extreme temperatures. If necessary, use a heat gun to gently warm the material during application.
Troubleshooting
If bubbles or wrinkles occur, try using a heat gun or repositioning the film with the Avery Dennison Easy Apply™ or RS technology.
5. Cleaning and Maintenance
Cleaning
Use a gentle cleaning solution (water with a small amount of soap) and a soft cloth. Avoid using harsh chemicals or abrasive materials.
Pressure Washing
Use pressure washing with caution, keeping pressure below 1200 psi and water temperature below 120° F.
6. Additional Tips
Testing
Thoroughly test all performance characteristics, including print quality, durability, and chemical resistance, before each production run.
