Ritrama RI-Mark Event AR800 Ultra Removable White
Central UK Location
Daily deliveries throughout
the UK and Europe
This ultra-removable white vinyl is the ideal choice for temporary signage. Its removability eliminates the need to buy multiple sign plates – simply remove the vinyl when no longer needed and use the sign plate for your next sign!
The removable adhesive leaves no residue behind, meaning no laborious cleaning required between applications.
RI-Mark Event Ultra Removable vinyl is perfect for applications such as temporary road signage, directional and safety signage. This fantastic product makes for more sustainable and cost-effective event and traffic management solutions.
Although fully removable, this vinyl also withstands all weather conditions – from harsh sunshine to the heaviest of downpours.
630mm and 1260mm widths available.
Available to buy in 5m multiples.
This ultra-removable white vinyl is the ideal choice for temporary signage. Its removability eliminates the need to buy multiple sign plates – simply remove the vinyl when no longer needed and use the sign plate for your next sign!
The removable adhesive leaves no residue behind, meaning no laborious cleaning required between applications.
RI-Mark Event Ultra Removable vinyl is perfect for applications such as temporary road signage, directional and safety signage. This fantastic product makes for more sustainable and cost-effective event and traffic management solutions.
Although fully removable, this vinyl also withstands all weather conditions – from harsh sunshine to the heaviest of downpours.
630mm and 1260mm widths available.
Available to buy in 5m multiples.
Applications
Temporary traffic signage or other short-term applications where easy removability is required.
Printing Methods
Testing for suitability between media, printers and inks is always recommended prior to use.
FAQ
Ar800 comes at both 1260mm or 630mm in width.
Ar800 uses an Acrylic removable adhesive.
Ar800’s adhesive features good clarity and clean removability from glass, laminated plastics and crosslinked enamels. It is not suitable for application on papers, PVC and air-dried paints and varnishes.
Ar800 uses a Monomeric gloss finish vinyl. The liner offers superior cuttability with conventional die-cutting and computer sign making systems.
Ar800 is sold in 5 metre multiples with 50 metres being on a full roll.
Ar800 is ideal for temporary road signage, directional and safety signage.
Product specification for RI-Mark Event AR800 Ultra Removable White
Download the product specification for RI-Mark Event AR800 Ultra Removable White here
Applying sign vinyl correctly is crucial for an attractive and durable finish. This guide covers the necessary tools, step-by-step instructions for both dry and wet application methods, and advice on troubleshooting bubbles and wrinkles.
Tools You Will Need For the Application of Sign Vinyl
- Squeegee
- Soft Cloth
- Masking Tape
- Wax Pencil
Instructions On How To Apply Sign Vinyl (Dry Method)
- Clean the Surface: Ensure the application surface is free of oil, dust, or dirt.
- Prepare the Vinyl Graphic: Place your vinyl graphic on a flat surface with the application tape side up. Use firm pressure with your squeegee to wipe the lettering. This helps the lettering stick to the application tape and release from the backing paper.
- Mark Guidelines: Use your wax pencil to mark appropriate guidelines on the substrate surface.
- Position and Hinge: Carefully place the vinyl graphic onto the desired surface. Secure a strip of masking tape to the top edge of the surface, creating a hinge.
- Remove Top Backing: Lift the vinyl graphic, pull back, and cut away the top section of the backing paper.
- Initial Placement: Hold the base of the vinyl graphic and allow it to return to its initial position.
- Apply and Remove Backing: Using your squeegee with light pressure, start from the top and work your way down using horizontal strokes. Apply the vinyl graphic while progressively removing sections of the backing paper.
- Final Squeegee Pass: Once all backing paper is removed, go over the vinyl graphic with your squeegee, applying more pressure.
- Allow to Cure: Leave the vinyl graphic for 10–15 minutes.
- Remove Application Tape: Carefully remove the application tape diagonally at a 180-degree angle.
- Finish: Rub the vinyl graphic with a soft cloth, focusing on the edges.
Remember: Take your time, follow instructions carefully, and ensure you have the correct sign vinyl for your project.
What Is The Wet Method For Sign Vinyl?
The wet method involves applying a vinyl graphic to a surface using water and soap. It's frequently used for large vinyl graphics because it allows for easier repositioning when the surface is wet. However, improper application can still lead to air bubbles and wrinkles.
Instructions On How To Apply Sign Vinyl Using The Wet Method
- Clean the Surface: Ensure the application surface is free of oil, dust, or dirt.
- Prepare the Vinyl Graphic: Place your vinyl graphic on a flat surface with the application tape side up. Use firm pressure with a squeegee to wipe the lettering, ensuring it sticks to the application tape and releases from the backing paper.
- Mark Guidelines: Use a wax pencil to mark appropriate guidelines on the substrate surface.
- Remove Backing Paper: Place the vinyl graphic face down on a flat surface and slowly and carefully peel the backing paper away from the vinyl graphic.
- Wet the Surface: Use a spray bottle containing warm (not boiling) water and a small amount of washing-up liquid. Spray the area where you're applying your vinyl graphic.
- Wet the Vinyl Graphic: Spray a small amount of the same water and washing-up liquid solution onto the adhesive side of the vinyl graphic.
- Position the Graphic: Place the vinyl graphic on the wet surface, using your guidelines to help position it. You can remove and reposition the vinyl graphic as long as the surface remains wet.
- Squeegee Out Water/Bubbles: Once correctly positioned, use your squeegee to force out bubbles and water. Start at the centre and work your way out, ensuring as much water as possible is removed from under the vinyl graphic.
- Allow to Dry: Allow the vinyl graphic to dry for 1 hour and 15 minutes.
- Remove Application Tape: Carefully peel the application tape diagonally, ensuring your hand is firmly on the vinyl graphic whilst peeling.
Can You Use Soapy Water To Apply Sign Vinyl?
Yes, soapy water is specifically used with the wet method for applying vinyl. It's beneficial for large graphics as it makes repositioning easier. After cleaning the surface, re-wet it with a spray bottle containing warm water and a small amount of washing-up liquid before applying the sticker.
How To Remove Air Bubbles From Sign Vinyl
Air bubbles are more common with the wet method. To remove them:
- Use an air release tool to pop air pockets. Do not use a razor blade or knife as this can damage the vinyl.
- Most high-quality vinyl is self-healing.
- Make only one release point and poke a hole in the edge of the bubble.
- After popping the bubble, use a squeegee to go over the puncture.
How To Remove Wrinkles From Sign Vinyl?
If wrinkles appear during application:
- For smaller wrinkles, push from the centre of the wrinkle to the edge of the graphic with your fingernail.
- For large wrinkles, you may need to slit the material and overlap the vinyl.
