Avery MPI 1105 Easy Apply & Avery Dol 1460 Lam 50m Bundle Pack
Central UK Location
Daily deliveries throughout
the UK and Europe
Bundle product - get one full roll each of Avery MPI 1105 and Avery Dol 1460 lamination film.
The ultimate wrapping solution - Avery Dennison MPI 1105 Wrapping series films bring new levels of printability, image quality and 3D conformability to vehicle wraps. Outstanding colour ‘pop’ and an ability to cope easily with challenges such as rivets and corrugations make Avery MPI 1105 the product of choice across many different applications.
The ultimate wrapping solution - Avery Dennison MPI 1105 Wrapping series films bring new levels of printability, image quality and 3D conformability to vehicle wraps. Outstanding colour ‘pop’ and an ability to cope easily with challenges such as rivets and corrugations make MPI 1105 the product of choice across many different applications.
New Avery MPI 1105 now offers up to 6 years printed* durability. Here as a bundle in combination with DOL 1460 Gloss, it enables an even longer lifespan for vehicle graphics, opening up a world of wrapping applications for customers and end-users.
Key features
- Superb 3D conformability
- Stunning and consistent printability
- UV, solvent, eco-solvent and latex inks compatible
- Easy Apply RS™ adhesive technology with air-egress, repositionability and slideability
- Reliable performance with long-term removability
- Maximum outdoor durability, up to 6 years printed*
- Covered by ICS Performance Guarantee
Key benefits
- Faster, easier installation, conforming to the most demanding corrugations
- Up to 30% application time savings with Easy Apply RS™ technology and its air-egress capability
- Ease of application with low initial tack, repositionabilty & slideability
- Creative freedom thanks to outstanding printed image quality and longer printed graphics lifespan (up to 6 years*)
*vertical printed durability, zone 1, in combination with DOL 1460/1480 Z series
Recommended uses
- Partial and full vehicle wraps
- Interior and exterior signs
Avery MPI 1105 Product Specification
Download a full product specification for Avery MPI 1105 here
Avery Portfolio Overview
Download the Avery Portfolio Overview here
Avery Dennison MPI 1105 Wrapping Series
Overview of the Avery MPI 1105 wrapping range
Avery Dennison Digital Media printing guidelines emphasise proper media handling, printing setup, and finishing processes to ensure optimal print quality and performance. These guidelines cover aspects like media profiles, drying times, application techniques, and troubleshooting.
1. Print Preparation
Media Profiles
Ensure the correct media profile is installed and selected in your print server. This profile contains information about the printer, RIP, ink, and the specific Avery Dennison media being used.
Drying
For solvent printing, films need to be fully dried before applying overlaminates. A 24-hour drying time is generally sufficient for full solvent inks, while 48 hours is recommended for eco-/mild solvent inks. Allow for longer drying if a lot of ink is deposited.
Winding
When drying, avoid tightly winding the material on a core, as this can hinder solvent evaporation. Loosely wound or stacked sheets are preferred.
2. Printing
Resolution
For sharp, clear images, a resolution of 300 DPI is recommended.
Colour Matching
Digital printing may have limitations in achieving precise Pantone or specific colour shades.
3. Finishing
Overlaminates
If applying overlaminates, ensure the printed material is thoroughly dry to prevent potential issues.
Cutting
For cutting, ensure the blade is clean and sharp.
Stabilisation
After curing, allow 4-8 hours for the ink and substrate to stabilize before die-cutting, pre-masking, or chemical resistance testing.
4. Application
Surface Preparation
Clean the substrate thoroughly before applying the media.
Application Tools
Use a squeegee with overlapping strokes, applying moderate pressure.
Temperature
Avoid applying films in extreme temperatures. If necessary, use a heat gun to gently warm the material during application.
Troubleshooting
If bubbles or wrinkles occur, try using a heat gun or repositioning the film with the Avery Dennison Easy Apply™ or RS technology.
5. Cleaning and Maintenance
Cleaning
Use a gentle cleaning solution (water with a small amount of soap) and a soft cloth. Avoid using harsh chemicals or abrasive materials.
Pressure Washing
Use pressure washing with caution, keeping pressure below 1200 psi and water temperature below 120° F.
6. Additional Tips
Testing
Thoroughly test all performance characteristics, including print quality, durability, and chemical resistance, before each production run.
