Avery MPI 1103 Easy Apply Smart Wrap & Dol 1360 Z Lam Bundle Pack 50m Rolls
Central UK Location
Daily deliveries throughout
the UK and Europe
For printed vehicle wraps that provide the ultimate in conformability, durability and true colour ‘pop’ this bundle pack has it all. With one full roll each of Avery MPI 1103 Easy Apply Smart Wrap and Avery DOL 1360 Z cast overlaminate, you’ll be safe in the knowledge that you’re using a matched system – and getting the whole system at a fantastic price.
50m rolls
Avery MPI 1103 Easy Apply Smart Wrap Vehicle Wrap
Avery Dennison MPI 1103 Easy Apply Smart Wrap offers excellent conformability, enabling quick 3D applications, even on the most difficult corrugations. Thanks to its unique air egress system, along with the repositionable adhesive, you’ll experience quick and easy application – saving you time and money. It is perfect for partial and full vehicle wraps, as well as interior and exterior signage. Avery Dennison MPI 1103 Easy Apply Smart Wrap is printable with all digital print technologies, delivering fantastic colour ‘pop’ and print quality.
Avery Dennison MPI 1103 Easy Apply Smart Wrap offers excellent conformability, enabling quick 3D applications, even on the most difficult corrugations. Thanks to its unique air egress system, along with the repositionable adhesive, you’ll experience quick and easy application – saving you time and money.
Avery Dennison®️ DOL 1360 Z Smart Lam cast overlaminate is a premium quality, ultra-flexible film. It has been specially designed for vehicle wrapping, to be used as protective overlaminate films for MPI™️ 1103 EA Smart Wrap printed images.
- Perfect for partial and full vehicle wraps, as well as interior and exterior signage
- Provides vibrant colour and enhanced durability
- Excellent printability on all main platforms
- Extreme conformability* on 3D surfaces and corrugations
- Repositionable adhesive for easier positioning during application
- Fast and efficient Easy Application
- Up to 7 years outdoor durability
* when used in combination with DOL 1360 Z cast overlaminates EU
Product specification for Avery MPI 1103 Easy Apply Smart Wrap Vehicle Wrap
Download the product specification for Avery MPI 1103 Easy Apply Smart Wrap Vehicle Wrap here
Product specification for Avery Dol 1360 Z Gloss Smart Lamination Film
Download the full specification for Avery Dol 1360 Z Gloss Smart Lamination Film here
Avery MPI 1103 Easy Apply Smart Wrap Vehicle Wrap Product Overview
Find out more about Avery MPI 1103 Easy Apply Smart Wrap Vehicle Wrap with this product overview.
Avery Dol 1360 Z Gloss Smart Lamination Film Product Overview
Find out more about Avery Dol 1360 Z Gloss Smart Lamination Film with this product overview.
Avery Dennison Digital Media printing guidelines emphasise proper media handling, printing setup, and finishing processes to ensure optimal print quality and performance. These guidelines cover aspects like media profiles, drying times, application techniques, and troubleshooting.
1. Print Preparation
Media Profiles
Ensure the correct media profile is installed and selected in your print server. This profile contains information about the printer, RIP, ink, and the specific Avery Dennison media being used.
Drying
For solvent printing, films need to be fully dried before applying overlaminates. A 24-hour drying time is generally sufficient for full solvent inks, while 48 hours is recommended for eco-/mild solvent inks. Allow for longer drying if a lot of ink is deposited.
Winding
When drying, avoid tightly winding the material on a core, as this can hinder solvent evaporation. Loosely wound or stacked sheets are preferred.
2. Printing
Resolution
For sharp, clear images, a resolution of 300 DPI is recommended.
Colour Matching
Digital printing may have limitations in achieving precise Pantone or specific colour shades.
3. Finishing
Overlaminates
If applying overlaminates, ensure the printed material is thoroughly dry to prevent potential issues.
Cutting
For cutting, ensure the blade is clean and sharp.
Stabilisation
After curing, allow 4-8 hours for the ink and substrate to stabilize before die-cutting, pre-masking, or chemical resistance testing.
4. Application
Surface Preparation
Clean the substrate thoroughly before applying the media.
Application Tools
Use a squeegee with overlapping strokes, applying moderate pressure.
Temperature
Avoid applying films in extreme temperatures. If necessary, use a heat gun to gently warm the material during application.
Troubleshooting
If bubbles or wrinkles occur, try using a heat gun or repositioning the film with the Avery Dennison Easy Apply™ or RS technology.
5. Cleaning and Maintenance
Cleaning
Use a gentle cleaning solution (water with a small amount of soap) and a soft cloth. Avoid using harsh chemicals or abrasive materials.
Pressure Washing
Use pressure washing with caution, keeping pressure below 1200 psi and water temperature below 120° F.
6. Additional Tips
Testing
Thoroughly test all performance characteristics, including print quality, durability, and chemical resistance, before each production run.
