Avery MPI 1104 Easy Apply PW Vehicle Wrap
Central UK Location
Daily deliveries throughout
the UK and Europe
Leveraging Avery Dennison’s superior print quality and outstanding conformability, MPI™ 1104 EA PW offers a dependable solution for 3D applications and vibrant designs. Featuring a newly developed adhesive system, this film improves repositionability, streamlining installation for greater speed, ease, and efficiency.
50 metres on a full roll.
Part of the MPI Cast range, MPI 1104 EA Premium Wrap is a glossy white, highly conformable self-adhesive cast vinyl. Featuring an Easy Apply liner, this product is ideal for applications on rivets and corrugations, eliminating the need for primers or cuts. Thanks to its repositionable adhesive, MPI 1104 EA PW can be effortlessly adjusted on the installation surface until it's properly positioned.
 |
This product is also available as a print and laminate bundle pack. Get the best print and performance results with a bundle - and save money! Click here to find out more. |
Conversion
MPI 1104 EA PW is designed to provide exceptional and consistent print performance across all major wide-format inkjet printer platforms, including Latex, Eco-Solvent, Hard/Mild Solvent, and UV-curable inks. To enhance colour and protect the images from UV radiation and abrasion, it is recommended to use an overlaminate. For graphics applied to corrugated vehicles or substrates, one of the Avery Dennison DOL 1400Z series conformable laminates can be used to protect the print and extend its lifespan. Do not apply the product using the wet application method.
Recommendations
- Full 3D vehicle wraps
- Vehicle graphics
- Interior & exterior decorative architectural applications
- All permanent applications requiring high conformability
Features
- Excellent print performance with Latex, UV, Eco-Solvent and Hard/mild solvent inks
- Superior 3D conformability* for demanding corrugations
- No additional installation techniques required for preparation of surfaces with deep corrugations
- Repositionable adhesive for easier and smoother positioning during application
- Air Egress feature to avoid air entrapment and wrinkles during application
- High gloss or matt finishes*
- Up to 7 years outdoor durability
- ICS Performance Guarantee
- HP Latex Certified
* when used in combination with DOL 1400 Z cast overlaminates
Product specification for Avery MPI 1104 Easy Apply PW Vehicle Wrap
Download the product specification for Avery MPI 1104 Easy Apply PW Vehicle Wrap here.
Product Overview - Avery MPI 1104 Easy Apply PW
Download the product overview for Avery MPI 1104 Easy Apply PW here
Avery Dennison Digital Media printing guidelines emphasise proper media handling, printing setup, and finishing processes to ensure optimal print quality and performance. These guidelines cover aspects like media profiles, drying times, application techniques, and troubleshooting.
1. Print Preparation
Media Profiles
Ensure the correct media profile is installed and selected in your print server. This profile contains information about the printer, RIP, ink, and the specific Avery Dennison media being used.
Drying
For solvent printing, films need to be fully dried before applying overlaminates. A 24-hour drying time is generally sufficient for full solvent inks, while 48 hours is recommended for eco-/mild solvent inks. Allow for longer drying if a lot of ink is deposited.
Winding
When drying, avoid tightly winding the material on a core, as this can hinder solvent evaporation. Loosely wound or stacked sheets are preferred.
2. Printing
Resolution
For sharp, clear images, a resolution of 300 DPI is recommended.
Colour Matching
Digital printing may have limitations in achieving precise Pantone or specific colour shades.
3. Finishing
Overlaminates
If applying overlaminates, ensure the printed material is thoroughly dry to prevent potential issues.
Cutting
For cutting, ensure the blade is clean and sharp.
Stabilisation
After curing, allow 4-8 hours for the ink and substrate to stabilize before die-cutting, pre-masking, or chemical resistance testing.
4. Application
Surface Preparation
Clean the substrate thoroughly before applying the media.
Application Tools
Use a squeegee with overlapping strokes, applying moderate pressure.
Temperature
Avoid applying films in extreme temperatures. If necessary, use a heat gun to gently warm the material during application.
Troubleshooting
If bubbles or wrinkles occur, try using a heat gun or repositioning the film with the Avery Dennison Easy Apply™ or RS technology.
5. Cleaning and Maintenance
Cleaning
Use a gentle cleaning solution (water with a small amount of soap) and a soft cloth. Avoid using harsh chemicals or abrasive materials.
Pressure Washing
Use pressure washing with caution, keeping pressure below 1200 psi and water temperature below 120° F.
6. Additional Tips
Testing
Thoroughly test all performance characteristics, including print quality, durability, and chemical resistance, before each production run.
