Avery MPI 2006 HOP Hi-Tack 1370mm x 50m


Central UK Location
Daily deliveries throughout
the UK and Europe
Avery Dennison® MPI 2006 HOP (high opactiy) Hi-Tack is a gloss white premium calandered vinyl with a permanent adhesive. This printable media has a high gloss finish and a StaFlat™ liner which provides easy handling and converting properties. Avery MPI 2006 HOP Hi-Tack has excellent printability and is suitable for eco-solvent, solvent, latex and UV curable inks.
This digital print product also provides excellent adhesion to low surface energy and ‘difficult’ substrates, such as HDPE and matt interior painted walls.
50 metres on a roll.
Avery Dennison® MPI 2006 Hi-Tack is a gloss white premium calandered vinyl with a permanent adhesive. This printable media has a high gloss finish and a StaFlat™ liner which provides easy handling and converting properties. Avery MPI 2006 Hi-Tack has excellent printability and is suitable for eco-solvent, solvent, latex and UV curable inks.
This digital print product also provides excellent adhesion to low surface energy and ‘difficult’ substrates, such as HDPE and matt interior painted walls.
- Excellent printability on eco-solvent, solvent, latex and UV curable inkjet printers
- StaFlat™ liner provides easy handling and converting properties
- High gloss finish for superior appearance
- Excellent adhesion to low surface energy and difficult to adhere to substrates, such as HDPE and matt interior painted walls
- Very good low temperature adhesive performance
- Good conformability to flat and simple curved surfaces
- Very good dimensional stability after installation
- Excellent outdoor durability and performance
Applications
- Rubbish bin signage and advertising
- Port-a-loos
- Wall graphics
- General signage
- Low surface energy substrates (especially PP & HDPE)
Specifications:
Film: 80 micron gloss white polymeric calendered vinyl
Adhesive: High tack, permanent, clear, acrylic-based
Backing: Two-sided PE-coated StaFlat paper, 145g/m²
Outdoor life: Up to 5 years (unprinted)
FAQ
Each roll of Avery MPI 2006 is 1370mm as standard.
Each roll of Avery 2006 is 50m long.
Avery MPI 2006 has a high gloss white finish by itself.
The matching laminates are Avery DOL 2460 (Gloss finish) and 2480 (Matt finish).
When printed and applied outdoors, Avery has rated MPI 2006 with up to 5-year durability.
Avery MPI 2006 can be applied to flat and simple curved surfaces.
Avery MPI 2006 HI-tack is designed to be used on surfaces which typically don’t take well to adhesive vinyls, such as such as HDPE and matt interior painted walls.
Yes, MPI 2006 has excellent lay flat qualities which reduces the chance of it curling and makes application and converting easier.
Avery Dennison Digital Media printing guidelines emphasise proper media handling, printing setup, and finishing processes to ensure optimal print quality and performance. These guidelines cover aspects like media profiles, drying times, application techniques, and troubleshooting.
1. Print Preparation
Media Profiles
Ensure the correct media profile is installed and selected in your print server. This profile contains information about the printer, RIP, ink, and the specific Avery Dennison media being used.
Drying
For solvent printing, films need to be fully dried before applying overlaminates. A 24-hour drying time is generally sufficient for full solvent inks, while 48 hours is recommended for eco-/mild solvent inks. Allow for longer drying if a lot of ink is deposited.
Winding
When drying, avoid tightly winding the material on a core, as this can hinder solvent evaporation. Loosely wound or stacked sheets are preferred.
2. Printing
Resolution
For sharp, clear images, a resolution of 300 DPI is recommended.
Colour Matching
Digital printing may have limitations in achieving precise Pantone or specific colour shades.
3. Finishing
Overlaminates
If applying overlaminates, ensure the printed material is thoroughly dry to prevent potential issues.
Cutting
For cutting, ensure the blade is clean and sharp.
Stabilisation
After curing, allow 4-8 hours for the ink and substrate to stabilize before die-cutting, pre-masking, or chemical resistance testing.
4. Application
Surface Preparation
Clean the substrate thoroughly before applying the media.
Application Tools
Use a squeegee with overlapping strokes, applying moderate pressure.
Temperature
Avoid applying films in extreme temperatures. If necessary, use a heat gun to gently warm the material during application.
Troubleshooting
If bubbles or wrinkles occur, try using a heat gun or repositioning the film with the Avery Dennison Easy Apply™ or RS technology.
5. Cleaning and Maintenance
Cleaning
Use a gentle cleaning solution (water with a small amount of soap) and a soft cloth. Avoid using harsh chemicals or abrasive materials.
Pressure Washing
Use pressure washing with caution, keeping pressure below 1200 psi and water temperature below 120° F.
6. Additional Tips
Testing
Thoroughly test all performance characteristics, including print quality, durability, and chemical resistance, before each production run.