Fedrigoni Ritrama RI-Jet M100 Matt White Removable 1370mm x 50m (04353)
Central UK Location
Daily deliveries throughout
the UK and Europe
Fedrigoni Ritrama Ri-Jet M100 Rem series is a self-adhesive film for Large Format Digital printing, especially designed for short-term advertising on flat surfaces.
The monomeric vinyl, UV stabilised, has an external colour stability up to 3 years, specially developed to be printed with solvent, eco-solvent, latex, and UV inkjet printing presses.
The 100 μm film thickness grants good ink absorption without making the face film too soft, which allows easier application. The removable water-based adhesive provides an easy removability from most substrates. The adhesive is available in clear, grey and black version.
The 135 g/m² liner or the 140g/m² micro-embossed PE coated kraft paper ensures good planarity and printing results.
REACH & RoHS compliant.
50 metres on a full roll, 1370mm wide.
Fedrigoni Ritrama Ri-Jet M100 Rem series is a self-adhesive film for Large Format Digital printing, especially designed for short-term advertising on flat surfaces.
The monomeric vinyl, UV stabilised, has an external colour stability up to 3 years, specially developed to be printed with solvent, eco-solvent, latex, and UV inkjet printing presses.
The 100 μm film thickness grants good ink absorption without making the face film too soft, which allows easier application. The removable water-based adhesive provides an easy removability from most substrates. The adhesive is available in clear, grey and black version.
The 135 g/m² liner or the 140g/m² micro-embossed PE coated kraft paper ensures good planarity and printing results.
REACH & RoHS compliant.
TYPICAL USE
- Short term outdoor advertising: trains, bus, billboards
- Short term indoor advertising: shops and malls, airport terminals, etc.
- Temporary point of sale advertising.
CONSTRUCTION
- Face film: 100 μm calendered monomeric film
- Adhesive: removable water-based acrylic
- Release liner: clay coated kraft paper 135 g/m2
Airflow liner: micro-embossed PE coated kraft paper 140 g/m2
CONVERTING METHOD
Specially developed to be printed with solvent, eco-solvent, latex, and UV inkjet printing presses.
To achieve the best possible print quality, make sure that the correct ICC profiles or printer settings are used. The printed media should dry minimum 24h prior to lamination.
We recommend a lamination with Ri-Lam M70 Clear Gloss, Matt or Satin to protect the printed image from UV fading and mechanical abrasion.
APPLICATION METHOD / INSTRUCTIONS FOR USE
Dry and wet application method on clean and degreased substrates for the product with kraft liner, while only the dry application method will be used with the Airflow liner.
Application temperature above 10°C.
EXPECTED DURABILITY
The expected vertical outdoor durability in Central Europe (zone 1) is 3 years.
This information is based on real file experience and artificial aging according to ISO 4892-2.
Note: Exposure to severe temperature and ultra-violet light will cause a quicker deterioration.
This applies also to polluted area, high altitude, horizontal applications, and south-facing exposure in north hemisphere.
SHELF LIFE
Shelf life is 2 years, when stored at 23 °C and 50 % relative humidity conditions.
Higher temperatures and/or humidity levels will reduce product shelf life.
NB: Printing results start to deteriorate after 12 months storage.
FAQ
RI-Jet M100 Removable is typically used for short term outdoor advertising: trains, bus, billboards, short term indoor advertising: shops and malls, airport terminals, and temporary point of sale advertising.
RI-Jet M100 Removable uses a removable water-based adhesive provides an easy removability from most substrates.
The face thickness, with adhesive 120 µm, without adhesive is 100 µm.
Both dry and wet application method on clean and degreased substrates for the product with kraft liner, while only the dry application method will be used with the Airflow liner. Application temperature above 10°C.
M100 removable is specially developed to be printed with solvent, eco-solvent, latex, and UV inkjet printing presses.
The width comes at 1370mm wide and 50m in length.
The shelf life is 2 years, when stored at 23 °C and 50 % relative humidity conditions.
Fedrigoni Ritrama Ri-Jet M100 Removable spec sheet
Download the full product specification for Fedrigoni Ritrama Ri-Jet M100 Removable here.
Within these Ritrama Digital Media printing guidelines, we cover proper media handling, printing setup, and finishing processes that will help to achieve optimal print quality and performance. These guidelines cover aspects like media profiles, drying times, application techniques, and troubleshooting.
1. Print Preparation:
Media Profiles:
Ensure the correct media profile is installed and selected in your print server. This profile contains information about the printer, RIP, ink, and the specific Ritrama media being used.
Drying:
For solvent printing, films need to be fully dried before applying overlaminates. A 24-hour drying time is generally sufficient for full solvent inks, while 48 hours is recommended for eco-/mild solvent inks. Allow for longer drying if a lot of ink is deposited.
Winding:
When drying, avoid tightly winding the material on a core, as this can hinder solvent evaporation. Loosely wound or stacked sheets are preferred.
2. Printing:
Resolution: For sharp, clear images, a resolution of 300 dpi is recommended.
Colour Matching: Digital printing may have limitations in achieving precise Pantone or specific colour shades.
3. Finishing:
Overlaminates:
If applying overlaminates, ensure the printed material is thoroughly dry to prevent potential issues.
Cutting:
For cutting, ensure the blade is clean and sharp.
Stabilisation:
After curing, allow 4-8 hours for the ink and substrate to stabilize before die-cutting, pre-masking, or chemical resistance testing.
4. Application:
Surface Preparation: Clean the substrate thoroughly before applying the media.
Application Tools: Use a squeegee with overlapping strokes, applying moderate pressure.
Temperature: Avoid applying films in extreme temperatures. If necessary, use a heat gun to gently warm the material during application.
Troubleshooting: If bubbles or wrinkles occur, try using a heat gun to help eliminate them. It may be possible to reposition some products, or push air bubbles out towards the edge of the media.
5. Cleaning and Maintenance:
Cleaning:
Use a gentle cleaning solution (water with a small amount of soap) and a soft cloth. Avoid using harsh chemicals or abrasive materials.
Pressure Washing:
Use pressure washing with caution, keeping pressure below 1200 psi and water temperature below 120° F.
6. Additional Tips:
Testing:
Thoroughly test all performance characteristics, including print quality, durability, and chemical resistance, before each production run.